1pc access control (Standalone Card Access Control Without software)
1pc magnetic lock
1pc power supply
1pc exit button
Specifications:
1. Capacity :500
2. Card Type:RFID and mifare card
3. Work distance:RF:1-15CM MF:1-7CM
4. Identify speed:<=1s
5. Work voltage:12VDC±10%
6. Work currency:<100mA
7. Work temperatrue:0-70
8. Relative humidity:20%RH-80%RH
9. Unlocking ciper:1 Group
10. Unlocking ways:Card ,pin ,card +pin
11. Weigand: NO
12. Size:117x117x21mm
13.weight:100
Power Supply:
Specifications:
100% Brand New.
Size: Approx. 120 x 95 x 38mm(L x W x H)
Input voltage: 110~240v
Input Frequency: 50~60Hz
Output voltage: DC 12V
Output Current: 3A
Output voltage trim range: ±10%~ ±15%
Insulation voltage: Junior/sub-polar inter-1500v ac, primary/shell between 1500V AC, subpolar/shell between 500V AC
Hold time: full load typically 20ms
Operating temperature: -20~ ±35 degree
Overload protection: All output in a short circuit, overload are protected; Power output of 0-15 seconds delay locks
Specifications:
Holding force: 180kgs
Voltage: DC 12V
Current: 380-430mA
Working temperature: -10 to 55 Celsius degree (14 to 131 Fahrenheit degree)
Humidity: 0 to 95%
Working mode: power-on to lock
Lock size: 17 * 3.8 * 2cm
Plate size: 13 * 3.3 * 1cm
Package weight: 1.3kg
